Tar and Gravel Roofs
Filter
Tar and Gravel Roofs
Splice Foot X Kit, Mill
Product number: 4000113
All-in-one mount and splice kit with K2 EverSeal preassembled on the base. Comes with one T-Bolt set and 2 self drilling lag screws.
The K2 Flex Foot is a versatile roof attachment that is compatible with nearly all roof types and can be installed to the rafter or decking.
Big Foot 6" w/ 3"+ Chem Link Clip
Product number: 4000218
The Big Foot is essentially a large L-Foot that provides more height adjustability. It is also compatible with a 3" Chem Link E-Curb and comes with a clip to help center your mount into the curb.
T-Foot X 6” Kit, Mill
Product number: 4000080
The T-Foot X is K2's roof attachment solution for pitched or low slope roofs. The kit includes the T-Bolt set to attach to the rail.
K2 Mid Clamp Set, Mill
Product number: 4000230
K2's updated mid clamp has the self-leveling base that was created from our innovative South Face End Clamp.
K2 Mid Clamp Set, Dark
Product number: 4000229
K2's updated Mid Clamp has the self-leveling base that was created from our innovative K2 End Clamp.
K2 End Clamp Set, Mill
Product number: 4000197
The K2 End Clamp is a self-leveling end clamp that is compatible with all K2 Systems.
The CrossRail 44-X may be K2's smallest and lightest rail profile, but it is just as strong as the 48-X.
The CrossRail 44-X may be K2's smallest and lightest rail profile, but it is just as strong as the 48-X.
Rail Connector CR 44-X, Set, Mill
Product number: 4000051
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
Rail Connector CR 44-X, Set, Dark
Product number: 4000052
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
The Dome Mid Clamp is a commercial mid clamp available in multiple size ranges.
K2's commercial aluminum end clamps come in mutliple sizes and are most often used in the D-Dome Railless² System.
K2's commercial aluminum end clamps come in mutliple sizes and are most often used in the D-Dome Railless² System.
CrossRail 48-XL is an very strong rail profile designed for areas with extreme weather conditions.
CrossRail 48-XL is an very strong rail profile designed for areas with extreme weather conditions.
RailConn CR 48-X,48-XL Struct Set, Dark
Product number: 4000386
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
RailConn CR 48-X,48-XL Struct Set, Mill
Product number: 4000385
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
The CrossRail 80 is K2's largest rail profile. It is predominately used for the Ground Mount System.
Rail Connector UL 2703 Set, CR80, Dark
Product number: 4000329
K2’s Rail Connector is a more efficient use of material and reduces rail waste.
Rail Connector UL 2703 Set, CR80, Mill
Product number: 4001196
K2’s Rail Connector is a more efficient use of material and reduces rail waste. The Set includes the T-Bolt and nut hardware.
WEEB Clip BMC, CR48, XR, DOME
Product number: 4000469
Bonding clip that attaches to the commercial alumimum end clamps used for the D-Dome Railless² System.
CR 44-X, Climber Set w/Hole
Product number: 4006043
The Climber Set is the piece that connects the north/south rails to the east/west rails for the Tilt Up System.
CR 48-X, 48-XL, 80 Climber w/Hole, Set
Product number: 4006042-H
The Climber Set is the piece that connects the north/south rails to the east/west rails for the Tilt Up System.
EndCap 44-X , K2
Product number: 4000176
K2 Systems offers end caps for every CrossRail profile. Simply snap onto the end of the rail for improved aesthetics.
CrossRail Tilt Connector Set
Product number: 4000505
Piece that connects the rear legs to the north-south rails of the Tilt Up System.
CrossRail Flat EndCap, CR 48-X,48-XL
Product number: 4000431
Flat end cap for the CrossRail 48-X or 48-XL to help enhance the aesthetics of the system.
Dome R^2 Base
Product number: 4000593
The Dome R² Base holds the bottom corners of the modules in the array.
Dome R^2 Roof Spacer Pad
Product number: 4000636
A stackable mat that protects the roof and levels the system in case of any roof undulations.
Dome R^2 Peak
Product number: 4000592
The Dome R² Peak is what gives the solar mounting system a fixed 10 degree tilt.
Dome R^2 Optimizer Mounting Bracket Kit
Product number: 4000646
Bracket used for attaching microinverters or optimizers on the peak of the D-Dome Railless² System. The kit includes all necessary installation hardware.
The Dome R² Ballast Porter holds the blocks necessary for ballasting the solar racking system.
EndCap, Black, CR80
Product number: 4001221
K2 Systems offers end caps for every CrossRail profile. Simply snap onto the end of the rail for improved aesthetics.
Dome R^2 Corner Strut Kit
Product number: 4000637
The Dome R² Corner Strut provides extra enforcement to the corner of the array in areas that have extreme winds. The kit includes all necessary installation hardware.
Dome R^2 Roof Protection Mat
Product number: 4000594
The Dome R² Roof Protection Mat is the piece that the Peak and Base sit on. It prevents any metal from scratching the roof's surface.
Dome R^2 Anchor Bracket for Porter Kit
Product number: 4000639
Optional anchor bracket to anchor the D-Dome Railless² System to the roof if needed. The kit includes all necessary installation hardware.
Dome R^2 M8x80 Socket Head Cap Screw, SS
Product number: 4000638
Stainless steel cap screw for the Dome R² System.
Sleeve CR 44-X, Extrusion
Product number: 4000177
K2 Systems offers sleeves so that you can cover the ends of the rails with a dark exterior.
CrossRail 3" Black Sleeve 48-X,48-XL
Product number: 4000583
K2 Systems offers sleeves so that you can cover the ends of the rails with a dark exterior.
SF Anchor Bracket
Product number: 4000194
The SF Anchor Bracket is optional and is used only if your jurisdiction requires you to anchor the system to the roof.
SF Mat/Spacer Pad
Product number: 4000193
The SF Mat and Spacer Pad acts as a roof protection mat and a stackable pad that can help even out roof undulations.
Tar and Gravel Roofs
Tar and Gravel Roofs
Tar and Gravel Roofs
Tar and Gravel Roofs
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.