CrossRail Tilt Up System
The K2 End Clamp is a self-leveling end clamp that is compatible with all K2 Systems.
The Dynobond 8" offers simple module-to-module row bonding, with a clean aesthetic hiding bonding hardware under the array.
The CrossRail 44-X may be K2's smallest and lightest rail profile, but it is just as strong as the 48-X.
The CrossRail 44-X may be K2's smallest and lightest rail profile, but it is just as strong as the 48-X.
CrossRail 48-XL is an very strong rail profile designed for areas with extreme weather conditions.
CrossRail 48-XL is an very strong rail profile designed for areas with extreme weather conditions.
The CrossRail 80 is K2's largest rail profile. It is predominately used for the Ground Mount System.
All-in-one mount and splice kit with K2 EverSeal preassembled on the base. Comes with one T-Bolt set and 2 self drilling lag screws.
All-in-one mount and splice kit with K2 EverSeal preassembled on the base. Comes with one T-Bolt set and 2 self drilling lag screws.
The K2 Flex Foot is a versatile roof attachment that is compatible with nearly all roof types and can be installed to the rafter or decking.
The K2 Flash Comp Kit is K2's very own composition shingle roof attachment. It is feature packed with redundant waterproofing.
The K2 Flash Comp Kit is K2's very own composition shingle roof attachment. It is feature packed with redundant waterproofing.
The EverFlash eComp Kit is a composition shingle roof flashing that is compatible with all K2 CrossRail systems.
The EverFlash eComp Kit is a composition shingle roof flashing that is compatible with all K2 CrossRail systems.
The EverFlash eComp Kit is a composition shingle roof flashing that is compatible with all K2 CrossRail systems.
The EverFlash eComp Kit is a composition shingle roof flashing that is compatible with all K2 CrossRail systems.
The PowerClamp is K2's roof attachment solution for standing seam metal roofs. This standard version uses two set screws.
The T-Foot X is K2's roof attachment solution for pitched or low slope roofs. The kit includes the T-Bolt set to attach to the rail.
The Big Foot is essentially a large L-Foot that provides more height adjustability. It is also compatible with a 3" Chem Link E-Curb and comes with a clip to help center your mount into the curb.
K2's Universal Mid Clamp is compatible with all our systems. This uses the legacy 6mm allen bolt.
K2's updated mid clamp has the self-leveling base that was created from our innovative South Face End Clamp.
K2's updated mid clamp has the self-leveling base that was created from our innovative South Face End Clamp.
K2's Universal Mid Clamp is compatible with all our systems.
K2's Universal Mid Clamp is compatible with all our systems. This uses the legacy 6mm allen bolt.
K2's Universal Mid Clamp is compatible with all our systems.
K2's Universal Mid Clamp is compatible with all our systems.
K2's Universal Mid Clamp is compatible with all our systems.
K2's Universal Mid Clamp is compatible with all our systems.
The Yeti Clamp 2.0 is K2 Systems' very own hidden end clamp, with enhanced aesthetics and simple installation.
The Yeti Clamp is K2 Systems' very own hidden end clamp.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
K2's commercial aluminum end clamps come in mutliple sizes and are most often used in the D-Dome Railless² System.
K2's commercial aluminum end clamps come in mutliple sizes and are most often used in the D-Dome Railless² System.
Top mounted grounding lug compatible with all K2 rail systems.
Grounding lug that attaches to the side channel of the CrossRail.
Hardware that attaches microinverters or optimizers to the rail.
The MLPE Module Frame Mount Kit is used to attach microinverters or optimizers to the module frame.
Grounding lug that attaches to the open end of the rail. It is most commonly used for the MiniRail XPRess and D-Dome Railless² systems.
The TC Wire Clip is a top-mounted wire management solution that is compatible with all of K2's rail profiles.
The Omega Clip is a side channel cable clip for CrossRail and MiniRail systems.
The HEYClip SunRunner Cable Clip locks over the lip of the rail to manage wires on the side of the rail.
CrossRail Tilt Up System
The CrossRail Tilt Up System is suitable for nearly all roof types including all flat or low slope roofs and composition shingle and metal pitched roofs. The system is pre-engineered for 7, 10 and 15 degree tilts. It is UL 2703 Listed for bonding and allows one ground lug per module row.
CrossRail Tilt Up System
We offer traditional metal flashing as well as non-metal flashings that are compatible with all composition shingle roof types. Our larger roof attachments such as the T-Foot X and Big Foot are also a great option for the Tilt Up System because they allow for more height adjustability.
You can attach the CrossRail System to a standing seam metal roof using either of our Standing Seam PowerClamps. They are available in Mini and Standard sizes. The mini has 1 set screw while the standard has 2.
There are a variety of roof attachments to choose from when installing the CrossRail Tilt Up System to flat roofs. You can simply install a standard L-Foot, or we offer the T-Foot X and Big Foot with are essentially longer L-Feet to provide more height adjustability.
CrossRail Tilt Up System
Technical data
| Rail Type | |
|---|---|
| CrossRail 44-X, Mill/Dark | |
| Material | 6000 Series Aluminum |
| W = width [mm] | 39 |
| H = height [mm] | 44 |
| Lengths [in] | 166", 180" |
| Applicable Roof Types | Composition shingle, tile, flat tile |
| CrossRail 48-X, Mill/Dark | |
| Material | 6000 Series Aluminum |
| W = width [mm] | 39 |
| H = height [mm] | 48 |
| Lengths [in] | 166", 180" |
| Applicable Roof Types | Composition shingle, tile, flat tile |
| CrossRail 48-XL, Mill/Dark | |
| Material | 6000 Series Aluminum |
| W = width [mm] | 39 |
| H = height [mm] | 48 |
| Lengths [in] | 166", custom |
| Applicable Roof Types | Composition shingle, tile, flat tile |
| CrossRail 80, Mill | |
| Material | 6000 Series Aluminum |
| W = width [mm] | 39 |
| H = height [mm] | 80 |
| Lengths [in] | 168", custom |
| Applicable Roof Types | Composition shingle, tile, flat tile |
CrossRail Tilt Up System
Downloads
CrossRail Tilt Up System
Videos
CrossRail Tilt Up System
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.