PVC Roofs
Filter
PVC Roofs
Splice Foot X Kit, Mill
Product number: 4000113
All-in-one mount and splice kit with K2 EverSeal preassembled on the base. Comes with one T-Bolt set and 2 self drilling lag screws.
Big Foot 6" w/ 3"+ Chem Link Clip
Product number: 4000218
The Big Foot is essentially a large L-Foot that provides more height adjustability. It is also compatible with a 3" Chem Link E-Curb and comes with a clip to help center your mount into the curb.
T-Foot X 6” Kit, Mill
Product number: 4000080
The T-Foot X is K2's roof attachment solution for pitched or low slope roofs. The kit includes the T-Bolt set to attach to the rail.
K2 Mid Clamp Set, Mill
Product number: 4000230
K2's updated mid clamp has the self-leveling base that was created from our innovative South Face End Clamp.
K2 Mid Clamp Set, Dark
Product number: 4000229
K2's updated Mid Clamp has the self-leveling base that was created from our innovative K2 End Clamp.
K2 End Clamp Set, Mill
Product number: 4000197
The K2 End Clamp is a self-leveling end clamp that is compatible with all K2 Systems.
The CrossRail 44-X may be K2's smallest and lightest rail profile, but it is just as strong as the 48-X.
The CrossRail 44-X may be K2's smallest and lightest rail profile, but it is just as strong as the 48-X.
Rail Connector CR 44-X, Set, Dark
Product number: 4000052
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
Rail Connector CR 44-X, Set, Mill
Product number: 4000051
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
The Dome Mid Clamp is a commercial mid clamp available in multiple size ranges.
K2's commercial aluminum end clamps come in mutliple sizes and are most often used in the D-Dome Railless² System.
K2's commercial aluminum end clamps come in mutliple sizes and are most often used in the D-Dome Railless² System.
CrossRail 48-XL is an very strong rail profile designed for areas with extreme weather conditions.
CrossRail 48-XL is an very strong rail profile designed for areas with extreme weather conditions.
RailConn CR 48-X,48-XL Struct Set, Dark
Product number: 4000386
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
RailConn CR 48-X,48-XL Struct Set, Mill
Product number: 4000385
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
The CrossRail 80 is K2's largest rail profile. It is predominately used for the Ground Mount System.
Rail Connector UL 2703 Set, CR80, Mill
Product number: 4001196
K2’s Rail Connector is a more efficient use of material and reduces rail waste. The Set includes the T-Bolt and nut hardware.
Rail Connector UL 2703 Set, CR80, Dark
Product number: 4000329
K2’s Rail Connector is a more efficient use of material and reduces rail waste.
WEEB Clip BMC, CR48, XR, DOME
Product number: 4000469
Bonding clip that attaches to the commercial alumimum end clamps used for the D-Dome Railless² System.
CR 44-X, Climber Set w/Hole
Product number: 4006043
The Climber Set is the piece that connects the north/south rails to the east/west rails for the Tilt Up System.
CrossRail Tilt Connector Set
Product number: 4000505
Piece that connects the rear legs to the north-south rails of the Tilt Up System.
CR 48-X, 48-XL, 80 Climber w/Hole, Set
Product number: 4006042-H
The Climber Set is the piece that connects the north/south rails to the east/west rails for the Tilt Up System.
EndCap 44-X , K2
Product number: 4000176
K2 Systems offers end caps for every CrossRail profile. Simply snap onto the end of the rail for improved aesthetics.
CrossRail Flat EndCap, CR 48-X,48-XL
Product number: 4000431
Flat end cap for the CrossRail 48-X or 48-XL to help enhance the aesthetics of the system.
EndCap, Black, CR80
Product number: 4001221
K2 Systems offers end caps for every CrossRail profile. Simply snap onto the end of the rail for improved aesthetics.
Dome R^2 Peak
Product number: 4000592
The Dome R² Peak is what gives the solar mounting system a fixed 10 degree tilt.
The Dome R² Ballast Porter holds the blocks necessary for ballasting the solar racking system.
Dome R^2 Optimizer Mounting Bracket Kit
Product number: 4000646
Bracket used for attaching microinverters or optimizers on the peak of the D-Dome Railless² System. The kit includes all necessary installation hardware.
Dome R^2 Base
Product number: 4000593
The Dome R² Base holds the bottom corners of the modules in the array.
Dome R^2 Corner Strut Kit
Product number: 4000637
The Dome R² Corner Strut provides extra enforcement to the corner of the array in areas that have extreme winds. The kit includes all necessary installation hardware.
Dome R^2 Roof Protection Mat
Product number: 4000594
The Dome R² Roof Protection Mat is the piece that the Peak and Base sit on. It prevents any metal from scratching the roof's surface.
Dome R^2 Roof Spacer Pad
Product number: 4000636
A stackable mat that protects the roof and levels the system in case of any roof undulations.
Dome R^2 M8x80 Socket Head Cap Screw, SS
Product number: 4000638
Stainless steel cap screw for the Dome R² System.
Dome R^2 Anchor Bracket for Porter Kit
Product number: 4000639
Optional anchor bracket to anchor the D-Dome Railless² System to the roof if needed. The kit includes all necessary installation hardware.
Sleeve CR 44-X, Extrusion
Product number: 4000177
K2 Systems offers sleeves so that you can cover the ends of the rails with a dark exterior.
CrossRail 3" Black Sleeve 48-X,48-XL
Product number: 4000583
K2 Systems offers sleeves so that you can cover the ends of the rails with a dark exterior.
SF Mat/Spacer Pad
Product number: 4000193
The SF Mat and Spacer Pad acts as a roof protection mat and a stackable pad that can help even out roof undulations.
SF Anchor Bracket
Product number: 4000194
The SF Anchor Bracket is optional and is used only if your jurisdiction requires you to anchor the system to the roof.
PVC Roofs
PVC Roofs
PVC Roofs
PVC Roofs
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.