Standing Seam Metal Roofs
The Dynobond 8" offers simple module-to-module row bonding, with a clean aesthetic hiding bonding hardware under the array.
The CrossRail 44-X may be K2's smallest and lightest rail profile, but it is just as strong as the 48-X.
The CrossRail 44-X may be K2's smallest and lightest rail profile, but it is just as strong as the 48-X.
CrossRail 48-XL is an very strong rail profile designed for areas with extreme weather conditions.
CrossRail 48-XL is an very strong rail profile designed for areas with extreme weather conditions.
The CrossRail 80 is K2's largest rail profile. It is predominately used for the Ground Mount System.
The K2 Flex Foot is a versatile roof attachment that is compatible with nearly all roof types and can be installed to the rafter or decking.
The PowerClamp is K2's roof attachment solution for standing seam metal roofs. This standard version uses two set screws.
The T-Foot X is K2's roof attachment solution for pitched or low slope roofs. The kit includes the T-Bolt set to attach to the rail.
The Big Foot is essentially a large L-Foot that provides more height adjustability. It is also compatible with a 3" Chem Link E-Curb and comes with a clip to help center your mount into the curb.
K2's Universal Mid Clamp is compatible with all our systems.
K2's Universal Mid Clamp is compatible with all our systems. This uses the legacy 6mm allen bolt.
K2's Universal Mid Clamp is compatible with all our systems.
K2's updated mid clamp has the self-leveling base that was created from our innovative South Face End Clamp.
K2's Universal Mid Clamp is compatible with all our systems.
K2's updated mid clamp has the self-leveling base that was created from our innovative South Face End Clamp.
K2's Universal Mid Clamp is compatible with all our systems.
K2's Universal Mid Clamp is compatible with all our systems.
K2's Universal Mid Clamp is compatible with all our systems. This uses the legacy 6mm allen bolt.
Mid clamp for the CrossRail Shared Rail System with a 43-50 mm module clamping range.
Mid clamp for the CrossRail Shared Rail System with a 43-50 mm module clamping range.
The Yeti Clamp is K2 Systems' very own hidden end clamp.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
Mid clamp for the CrossRail Shared Rail System with a 46-50 mm module clamping range.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
Mid clamp for the CrossRail Shared Rail System with a 46-50 mm module clamping range.
K2's commercial aluminum end clamps come in mutliple sizes and are most often used in the D-Dome Railless² System.
K2's commercial aluminum end clamps come in mutliple sizes and are most often used in the D-Dome Railless² System.
Top mounted grounding lug compatible with all K2 rail systems.
Grounding lug that attaches to the side channel of the CrossRail.
Hardware that attaches microinverters or optimizers to the rail.
The MLPE Module Frame Mount Kit is used to attach microinverters or optimizers to the module frame.
Grounding lug that attaches to the open end of the rail. It is most commonly used for the MiniRail XPRess and D-Dome Railless² systems.
The TC Wire Clip is a top-mounted wire management solution that is compatible with all of K2's rail profiles.
The Omega Clip is a side channel cable clip for CrossRail and MiniRail systems.
The HEYClip SunRunner Cable Clip locks over the lip of the rail to manage wires on the side of the rail.
The Climber Set is the piece that connects the north/south rails to the east/west rails for the Tilt Up System.
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
The Climber Set is the piece that connects the north/south rails to the east/west rails for the Tilt Up System.
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
Standing Seam Metal Roofs
Possible systems
Standing Seam Metal Roofs
Standing Seam Metal Roofs
Standing Seam Metal Roofs
K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.