CrossRail Shared Rail System

The CrossRail Shared Rail System is suitable for installation on composition shingle and standing seam metal roofs. It reduces the amount of rail and roof attachments needed by allowing the modules to share a rail in between them.

Areas of application

To install the CrossRail Shared Rail System to a composition shingle roof you'll need to use the EverFlash eComp + SR Slide Kit. This a traditional metal flashing that includes a slide bracket to allow for more flexibility with where to anchor the L-Foot.

You can attach the CrossRail System to a standing seam metal roof using either of our Standing Seam PowerClamps. They are available in Mini and Standard sizes. The mini has 1 set screw while the standard has 2.

Technical data

Rail Type
CrossRail 44-X, Mill
Material 6000 Series Aluminum
W = width [mm] 39
H = height [mm] 44
Lengths [in] 166", 180"
Applicable Roof Types Composition shingle, tile, flat tile
CrossRail 48-X, Mill/Dark
Material 6000 Series Aluminum
W = width [mm] 39
H = height [mm] 48
Lengths [in] 166", 180"
CrossRail 48-XL, Mill/Dark
Material 6000 Series Aluminum
Applicable Roof Types Composition shingle, tile, flat tile
W = width [mm] 39
H = height [mm] 48
Lengths [in] 166", custom
Applicable Roof Types Composition shingle, tile, flat tile
CrossRail 80, Mill
Material 6000 Series Aluminum
W = width [mm] 39
H = height [mm] 80
Lengths [in] 168", custom
Applicable Roof Types Composition shingle, tile, flat tile

Downloads

CrossRail Shared Rail System - Assembly Instructions

CrossRail Shared Rail System - Product Sheet

CrossRail Shared Rail System Technical Sheet

Shared Rail-48/80 ASCE 7-16-HG-Master

Shared Rail-48/80 ASCE 7-16-MS-Master

UL Online Certification

UL Certificate of Compliance

UL Certificate of Conformance