CrossRail Shared Rail System
Filter
CrossRail Shared Rail System
The K2 End Clamp is a self-leveling end clamp that is compatible with all K2 Systems.
The Dynobond 8" offers simple module-to-module row bonding, with a clean aesthetic hiding bonding hardware under the array.
The CrossRail 44-X may be K2's smallest and lightest rail profile, but it is just as strong as the 48-X.
The CrossRail 44-X may be K2's smallest and lightest rail profile, but it is just as strong as the 48-X.
CrossRail 48-XL is an very strong rail profile designed for areas with extreme weather conditions.
CrossRail 48-XL is an very strong rail profile designed for areas with extreme weather conditions.
The CrossRail 80 is K2's largest rail profile. It is predominately used for the Ground Mount System.
The K2 Flex Foot is a versatile roof attachment that is compatible with nearly all roof types and can be installed to the rafter or decking.
The EverFlash eComp + SR Slide Kit is an adjustable composition shingle roof attachment that is optimized for K2's CrossRail Shared Rail System.
The EverFlash eComp + SR Slide Kit is an adjustable composition shingle roof attachment that is optimized for K2's CrossRail Shared Rail System.
The PowerClamp is K2's roof attachment solution for standing seam metal roofs. This standard version uses two set screws.
K2's Universal Mid Clamp is compatible with all our systems.
K2's Universal Mid Clamp is compatible with all our systems. This uses the legacy 6mm allen bolt.
Mid clamp for the CrossRail Shared Rail System with a 43-50 mm module clamping range.
Mid clamp for the CrossRail Shared Rail System with a 43-50 mm module clamping range.
K2's Universal Mid Clamp is compatible with all our systems.
K2's Universal Mid Clamp is compatible with all our systems. This uses the legacy 6mm allen bolt.
K2's Universal Mid Clamp is compatible with all our systems.
K2's Universal Mid Clamp is compatible with all our systems.
K2's updated mid clamp has the self-leveling base that was created from our innovative South Face End Clamp.
K2's Universal Mid Clamp is compatible with all our systems.
K2's updated mid clamp has the self-leveling base that was created from our innovative South Face End Clamp.
The Yeti Clamp is K2 Systems' very own hidden end clamp.
The Yeti Clamp 2.0 is K2 Systems' very own hidden end clamp, with enhanced aesthetics and simple installation.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
Mid clamp for the CrossRail Shared Rail System with a 46-50 mm module clamping range.
Mid clamp for the CrossRail Shared Rail System with a 46-50 mm module clamping range.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
K2's Universal End Clamp is our standard end clamp that is compatible with all our systems.
Grounding lug that attaches to the side channel of the CrossRail.
Hardware that attaches microinverters or optimizers to the rail.
The MLPE Module Frame Mount Kit is used to attach microinverters or optimizers to the module frame.
Grounding lug that attaches to the open end of the rail. It is most commonly used for the MiniRail XPRess and D-Dome Railless² systems.
The TC Wire Clip is a top-mounted wire management solution that is compatible with all of K2's rail profiles.
The Omega Clip is a side channel cable clip for CrossRail and MiniRail systems.
The HEYClip SunRunner Cable Clip locks over the lip of the rail to manage wires on the side of the rail.
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
The K2 Rail Connector is a structural external connector that attaches to the rail with two T-Bolts and nuts.
K2’s Rail Connector is a more efficient use of material and reduces rail waste.
K2’s Rail Connector is a more efficient use of material and reduces rail waste. The Set includes the T-Bolt and nut hardware.
The Add-On for the Shared Rail System is 10mm in height.
CrossRail Shared Rail System
The CrossRail Shared Rail System is suitable for installation on composition shingle and standing seam metal roofs. It reduces the amount of rail and roof attachments needed by allowing the modules to share a rail in between them.

CrossRail Shared Rail System
Areas of application
To install the CrossRail Shared Rail System to a composition shingle roof you'll need to use the EverFlash eComp + SR Slide Kit. This a traditional metal flashing that includes a slide bracket to allow for more flexibility with where to anchor the L-Foot.

You can attach the CrossRail System to a standing seam metal roof using either of our Standing Seam PowerClamps. They are available in Mini and Standard sizes. The mini has 1 set screw while the standard has 2.

CrossRail Shared Rail System
Technical data
Rail Type | |
---|---|
CrossRail 44-X, Mill | |
Material | 6000 Series Aluminum |
W = width [mm] | 39 |
H = height [mm] | 44 |
Lengths [in] | 166", 180" |
Applicable Roof Types | Composition shingle, tile, flat tile |
CrossRail 48-X, Mill/Dark | |
Material | 6000 Series Aluminum |
W = width [mm] | 39 |
H = height [mm] | 48 |
Lengths [in] | 166", 180" |
CrossRail 48-XL, Mill/Dark | |
Material | 6000 Series Aluminum |
Applicable Roof Types | Composition shingle, tile, flat tile |
W = width [mm] | 39 |
H = height [mm] | 48 |
Lengths [in] | 166", custom |
Applicable Roof Types | Composition shingle, tile, flat tile |
CrossRail 80, Mill | |
Material | 6000 Series Aluminum |
W = width [mm] | 39 |
H = height [mm] | 80 |
Lengths [in] | 168", custom |
Applicable Roof Types | Composition shingle, tile, flat tile |
CrossRail Shared Rail System
Downloads
Torque Flyer
CrossRail Shared Rail System
Videos
CrossRail Shared Rail System

K2 Base: Easy, fast and safe planning
Quick and easy planning in five steps of K2 mounting systems for pitched and flat roofs. Our free planning tool K2 Base has a dashboard for efficient project management. Google Maps integration and graphic drawing tools support you in planning and make it easier.